When designed air flow drying system, we fully considered each factor of turbulent flow,cyclone separating and heat exchange etc., so that each
collocation and parameter have definite theory basis, such as heat exchange's collocation , temperature control of inlet air and outlet air,diameter
change of cyclone pipe etc. Through measuring on feeding material moisture,or temperature difference between inlet and outlet, the feeding
quantity and inlet steam volume can be automatic adjusted, thus the water content of product could of product could reach the technology
requirement.This kind airflow dryer is not only suitable to all kinds potato kinds starch to be dried,but also adaptable to the drying of corn starch
and wheat starch.
Main technical parameters
| Model | DG-3.2 | DG-4.0 | DG-6.0 | DG-10.0 |
| Output(t/h) | 3.2 | 4.0 | 6.0 | 10.0 |
| Power capacity(Kw) | 97 | 139 | 166 | 269 |
| Moisture of wet starch(%) | ≤40 | ≤40 | ≤40 | ≤40 |
| Moisture of dry starch(%) | 12-14 | 12-14 | 12-14 | 12-14 |
Advantages of airflow dryer
1. Fully considered each factor of turbulent flow, cyclone separating and heat exchange.
2. Parts contact with starch is made of stainless steel 304.
3. Energy saving, moisture of product stable.
4. The moisture of starch is very stable, and varied 12.5%-13.5% by automatic control which can control the moisture of starch by controlling feeding quantity of steam and wet starch.
5. Less starch loss from wind exhausted.
6. The complete solved plan for a whole flash dryer system .
The working principle of airflow dryer
The cold air enters the radiator plate through the air filter, and the hot air flow after heating enters the dry air pipe. Meanwhile, the wet material
enters the hopper of the feeding unit from the wet starch inlet, and is transported into the hoist by the feeding winch.The hoist rotates at high
speed to drop the wet material into the dry duct, so that the wet material is suspended in the high speed hot air stream and heat is
exchanged.After the material is dried, it enters the cyclone separator with the airflow, and the separated dry material is discharged by wind
winding, and the finished product is screened and packed into the warehouse. And the separated exhaust gas, by the exhaust fan into the exhaust
gas duct, into the atmosphere.
